1×16 Blockless Fiber PLC Splitter, Singlemode, 900μm Fiber, SC/APC Connector
Planar lightwave circuit (PLC) splitter is a type of optical power management device that is fabricated using silica optical waveguide technology to distribute optical signals from Central Office (CO) to multiple premise locations.
Blockless PLC splitter has stronger fiber protection than bare fiber splitter, which is a miniaturization result of cassette splitter. It's mainly used for various connection and distribution boxes or network cabinets.
|1×8 blockless PLC Splitter, SC/APC connector||Optical Signal Distribution|
|900μm ITU G.657A1 for fiber input/output||Data Communications|
|Low insertion loss ≤ 13.7dB||Lan and CATV System|
|Low polarization dependent loss (PDL) ≤ 0.3dB||FTTX Deployment|
|Operating bandwidth: 1260 - 1650nm||FTTH Network|
|Compact design, suitable for installation in optical equipments||Passive Optical Networks (PON)|
|Wide Operating Temperature: -40 - 85°C, support industry standard applications||Measuring System and Laser System|
|High reliability and stability, Telecordia GR-1221/1209 compliant||DWDM and CWDM Systems|
Telcordia 1209 & 1221 Test Results
Name of the test
Temperature- Humidity aging
85°C and 85% RH
10 - 55Hz, 1.52mm double amplitude, in three axes
Test Impact of 500g (mass ≤ 0.125kg), 1ms , half sine pulse
Temperature Cycling Test
-40 - 70°C, Ramp rate: 1°C /min, Dwell time > 15min
Temperature- Humidity cycling
-40 - 85°C , between 10°C and 23°C - 85% RH, at 85°C - 20%RH,
between °C and 85°C - maintain a linear change in RH,
below 10°C - uncontrolled RH
43 ± 2°C , PH 5.5 ± 0.5
Fiber Side Pull test
0.23 kg load, 90° angle , 2 directions
Fiber Side Pull test
0.45 Kg load for Single Input Fiber, 1.5 Kg load for 8 Fiber Ribbon Outputs
Compact design, suitable for installation in outdoor fiber distribution box
The blockless splitter features small size, which is an intermediate choice between volume miniaturization and reliable fiber protection. It is suitable for installation in your system design and manufacturing. Many of our OEM customers in the FTTH, FTTX, PON, GOPN get the blockless splitters together.
Dimension: 60(L) × 12 (W) × 4(H) mm
FS.COM provides whole series of 1×N and 2×N splitter products that are tailored for specific applications
Standard configurations include 1×4, 1×8, 1×16, 1×32 and 1×64 configurations, as well as custom 2xN configurations.
We offer them as plain devices with or without connectors but as well packaged according to your specific needs in 1RU 19” chassis, standard LGX cassettes, splice pigtailed ABS modules, etc.