1x16 PLC Fiber Splitter, Splice/Pigtailed ABS Module, 3.0mm, SC/APC

1x16 PLC Fiber Splitter, Splice/Pigtailed ABS Module, 3.0mm, SC/APC

Your Price: $26.00
Out of Stock.
Part Number:RVGSPLT--16 SC/APC
1×16 Fiber PLC Splitter, ABS Box Type, Singlemode

Planar lightwave circuit (PLC) splitter is a type of optical power management device that is fabricated using silica optical waveguide technology to distribute optical signals from Central Office (CO) to multiple premise locations.

Pigtailed ABS splitter is most commonly used in the PON networks. It provides the complete protection for inner optical components and cable, as well as designed for the convenient and reliable installation, but its volume is relatively large. It's mainly used for various connection and distribution products.

Configuration Type: 1×16, SC/APC connectorOptical Signal Distribution
3.0mm ITU G.657A1 for fiber input/outputData Communications
Low insertion loss ≤ 13.7dBLan and CATV System
Low polarization dependent loss (PDL) ≤ 0.3dBFTTX Deployment
Operating bandwidth: 1260 - 1650nmFTTH Network
Compact design, suitable for installation in optical equipmentsPassive Optical Networks (PON)
Wide Operating Temperature: -40 - 85°C, support industry standard applicationsMeasuring System and Laser System
High reliability and stability, Telecordia GR-1221/1209 compliantDWDM and CWDM Systems
Telcordia 1209 & 1221 Test Results
Name of the test
Temperature- Humidity aging
85°C and 85% RH
7 days
10 - 55Hz, 1.52mm double amplitude, in three axes
1 hour
Component Impact
Test Impact of 500g (mass ≤ 0.125kg), 1ms , half sine pulse
2 impacts
Temperature Cycling Test
-40 - 70°C, Ramp rate: 1°C /min, Dwell time > 15min
10 cycles
Temperature- Humidity cycling
-40 - 85°C , between 10°C and 23°C - 85% RH, at 85°C - 20%RH,
between °C and 85°C - maintain a linear change in RH,
below 10°C - uncontrolled RH
14 days
Water Immersion
43 ± 2°C , PH 5.5 ± 0.5
7 days
Fiber Side Pull test
0.23 kg load, 90° angle , 2 directions
5 seconds
Fiber Side Pull test
0.45 Kg load for Single Input Fiber, 1.5 Kg load for 8 Fiber Ribbon Outputs
5 seconds
Compact design, suitable for installation in outdoor fiber distribution box
The ABS PLC splitter supports the protection for inner componnents, it is suitable for reliable installation in your system design and manufacturing. Many of our OEM customers in the FTTH, FTTX, PON, GOPN prefer to use the ABS PLC splitter together with outdoor fiber distribution box.
Mechanical Drawing
Dimension: 120(L) × 80 (W) × 18(H) mm FS.COM
FS.COM provides whole series of 1×N and 2×N splitter products that are tailored for specific applications
Standard configurations include 1×4, 1×8, 1×16, 1×32 and 1×64 configurations, as well as custom 2xN configurations.
We offer them as plain devices with or without connectors but as well packaged according to your specific needs in 1RU 19” chassis, standard LGX cassettes, splice pigtailed ABS modules, etc.

Recently Viewed Items