Metal 2
The new, completely waterproof, rugged, and super high powered RouterBOARD Metal. The serious outdoor wireless device. Now in 2.4Ghz with amazing 1600mW TX power!
Fully sealed, industrial design metal case, powered by RouterBOARD and RouterOS. 1.6 WATT of output power - to reach the last mile, in any conditions. It comes with L4 license, so you can attach your favorite antennna to use it as an AP, to make wireless point-to-point links or as a CPE- whatever you prefer! Works in the 2GHz frequency (2192-2732MHz depending on country regulations)
It has a built-in N-male connector, and pole attachment points, so you can attach it to an antenna directly, or use a standard antenna cable. LED signal indicators make it easy to install and align.
Package contains Metal-2SHPn, mounting loops, PoE injector, power adapter and 6dBi omni antenna
Product specifications
| Details |
|---|
| Product code | RBMetal2SHPn |
| 10/100 Ethernet ports | 1 |
| Architecture | MIPS-BE |
| CPU | AR7241 |
| CPU core count | 1 |
| CPU nominal frequency | 400 MHz |
| Dimensions | 177x44x44mm, 193g |
| License level | 4 |
| Max Power consumption | 11.5W |
| Number of chains | 1 |
| Operating System | RouterOS |
| PCB temperature monitor | Yes |
| PoE in | Passive PoE |
| PoE-IN | 10-30 V |
| Size of RAM | 64 MB |
| Storage size | 64 MB |
| Storage type | NAND |
| Tested ambient temperature | -30C to +70C |
| Voltage Monitor | Yes |
| Wireless 2.4 GHz chip model | AR9283 |
| Wireless 2.4 GHz standards | 802.11b/g/n |
Wireless specifications
| 2.4 GHz |
|---|
| Transmit power (dBm) | Receive Sensitivity | Transmit power (mW) |
|---|
| 6MBit/s | 32 | -93 | 1585 |
| 54MBit/s | 27 | -77 | 501 |
| MCS0 | 32 | -92 | 1585 |
Included parts
Ethernet test results
- All tests are done with Xena Networks specialized test equipment (XenaBay),and done according to RFC2544 (Xena2544)
- Max throughput is determined with 30+ second attempts with 0,1% packet loss tolerance in 64, 512, 1518 byte packet sizes
- Values in Italic indicate that max throughput was reached without maxing out CPU, but because board interface configuration was maxed out
- Test results show device maximum performance, and are reached using mentioned hardware and software configuration, different configurations most likely will result in lower results