MikroTik Switch CRS210-8G-2S+IN

MikroTik Switch CRS210-8G-2S+IN

Your Price: $188.00
Retail Price:$229.00
You Save:$41.00(18%)
Out Of Stock.
Part Number:CRS210-8G-2S+IN


Cloud Router Switch 210-8G-2S+IN is new “small size low cost” member of our CRS series. It comes with eight Gigabit Ethernet ports and two SFP+ cages for 10G connectivity (first port supports 1.25G/10G modules, second port only 10G modules). Product supports 10-57V DC.

Our CRS series combines the best features of a fully functional router and a Layer 3 switch, is powered by the familiar RouterOS. All the specific Switch configuration options are available in a special Switch menu, but if you want, ports can be removed from the switch configuration, and used for routing purposes.

Box includes- Switch, 24v 0.8A power supply, rackmount ears

Product specifications

Product codeCRS210-8G-2S+IN
10/100/1000 Ethernet ports8
802.3af supportYes
CPU core count1
CPU nominal frequency400 MHz
Dimensions200x144x47mm (case)
License level5
Max Power consumption13W
Operating SystemRouterOS
PCB temperature monitorYes
PoE inYes
Power Jack1
SFP+ ports2
Serial portRJ45
Size of RAM64 MB
Storage size128 MB
Storage typeNAND
Tested ambient temperature-35C to +65C tested
Voltage MonitorYes

Included parts

Switching results

ModeConfiguration64 byte512 byte1518 byte
SwitchingNon blocking Layer 2 throughput41,666.721,333.36,578.926,947.42,275.727,635.9
SwitchingNon blocking Layer 2 capacity41,666.742,666.76,578.953,894.72,275.755,271.8
SwitchingNon blocking Layer 1 throughput41,666.728,000.06,578.928,000.02,275.728,000.0
SwitchingNon blocking Layer 1 capacity41,666.756,000.06,578.956,000.02,275.756,000.0

Ethernet test results

CRS210-8G-2S+INQCA8519 Max possible throughput test
ModeConfiguration1518 byte512 byte64 byte
Bridgingnone (fast path)26.7324.228.6117.124.512.5
Bridging25 bridge filter rules21.4259.922.491.822.211.4
Routingnone (fast path)23.0279.323.596.324.512.5
Routing25 simple queues19.6238.022.491.821.010.8
Routing25 ip filter rules7.995.910.442.610.85.5
  1. All tests are done with Xena Networks specialized test equipment (XenaBay),and done according to RFC2544 (Xena2544)
  2. Max throughput is determined with 30+ second attempts with 0,1% packet loss tolerance in 64, 512, 1518 byte packet sizes
  3. Values in Italic indicate that max throughput was reached without maxing out CPU, but because board interface configuration was maxed out
  4. Test results show device maximum performance, and are reached using mentioned hardware and software configuration, different configurations most likely will result in lower results

Recently Viewed Items