This small home access point is the perfect device for homes or small offices where all you need is a wireless AP and a few wired devices connected. Based on our popular RB951-2n, the new hAP is an improvement in many areas.
The device can be powered from the power jack or with passive PoE from a PoE injector. The power adapter is included.
hAP provides PoE output function for port #5 - it can power other PoE capable devices with the same voltage as applied to the unit. Maximum load on the port is 500mA.
The hAP is preconfigured, so all you need to do, is plug in the internet cable, the power, and start using the internet by connecting to the MikroTik network.
|10/100 Ethernet ports||5|
|CPU core count||1|
|CPU nominal frequency||650 MHz|
|Dimensions||113 x 89 x 28mm|
|Max Power consumption||5W|
|Number of USB ports||1|
|Number of chains||2|
|PoE in||Passive PoE|
|PoE out||Passive PoE|
|Size of RAM||64 MB|
|Storage size||16 MB|
|Tested ambient temperature||-30 + 70 C|
|USB Power Reset||Yes|
|USB slot type||USB type A|
|Wireless 2.4 GHz chip model||QCA9531|
|Wireless 2.4 GHz standards||802.11b/g/n|
|Transmit power (dBm)||Receive Sensitivity||Transmit power (mW)|
Ethernet test results
|RB951Ui-2nD||QCA9531 (650Mhz) 100M all port test|
|Mode||Configuration||1518 byte||512 byte||64 byte|
|Bridging||none (fast path)||40.6||493.0||117.4||480.9||217.0||111.1|
|Bridging||25 bridge filter rules||40.6||493.0||70.1||287.1||70.9||36.3|
|Routing||none (fast path)||40.6||493.0||117.4||480.9||200.8||102.8|
|Routing||25 simple queues||40.6||493.0||79.6||326.0||90.8||46.5|
|Routing||25 ip filter rules||40.6||493.0||42.2||172.8||43.2||22.1|
- All tests are done with Xena Networks specialized test equipment (XenaBay),and done according to RFC2544 (Xena2544)
- Max throughput is determined with 30+ second attempts with 0,1% packet loss tolerance in 64, 512, 1518 byte packet sizes
- Values in Italic indicate that max throughput was reached without maxing out CPU, but because board interface configuration was maxed out
- Test results show device maximum performance, and are reached using mentioned hardware and software configuration, different configurations most likely will result in lower results