The BaseBox 6 in an outdoor wireless device, based on our popular RB912 model, fitted with two SMA connectors for antennas, and a cable hood for protection against moisture. Also available are three additional places for antenna connectors, in case you wish to use the BaseBox miniPCIe slot for one more wireless interface to make a dual band device, or a 3G/4G modem.
Designed to use as an 6GHz AP with our 6GHz CPEs, like DynaDish 6 and SXT 6.
IMPORTANT! Product is available for 5.9-6.4GHz license holders only, you would need to show your license to Distributor to be able to place your order.
This product is not suitable for unlicensed ISM bands. Device use is subject to country regulations. Availability might be limited depending on distributor stock and country regulations.
Send purchase questions
- Support & Downloads
- Test results
|CPU core count||1|
|CPU nominal frequency||600 MHz|
|Dimensions||246 x 135 x 50 mm|
|Size of RAM||64 MB|
|Storage size||128 MB|
|Tested ambient temperature||-40°C .. +70°C|
|PoE in||Passive PoE|
|PoE in input Voltage||10-30 V|
|Number of DC inputs||1 (PoE-IN)|
|Max power consumption||23|
|Max power consumption without attachments||12W|
|Wireless 6 GHz number of chains||2|
|Wireless 6 GHz standards||802.11a/n|
|Wireless 6 GHz chip model||AR9342|
|10/100/1000 Ethernet ports||1|
|Number of SIM slots||1 Modem (Mini SIM)|
|Number of USB ports||1|
|USB Power Reset||Yes|
|USB slot type||USB type A|
|Max USB current (A)||1|
|PCB temperature monitor||Yes|