wAP (black edition)
The wAP is a small weatherproof wireless access point for your mobile devices - perfect for installation outside your house, in the garden, on your porch or anywhere else where you need wireless access from your phone or computer.
The device has one 10/100 Ethernet port, it supports 802.11b/g/n wireless standards. It looks unobtrusive and sleek, available in two colours - black (RBwAP2nD-BE) and white (RBwAP2nD).
The wAP is weatherproof and can be fixed to any external wall from the inside of the case - so that it is securely attached to it's mounting location. The bottom door can also be secured with a special screw, which can only be opened by the owner.
It is also possible to run the Ethernet cable directly behind the unit, to inside the wall, there is a special opening on the back of the case. This way, the unit doesn’t attract attention and blends into any environment.
|10/100 Ethernet ports||1|
|CPU core count||1|
|CPU nominal frequency||650 MHz|
|Max Power consumption||4W|
|Number of chains||2|
|Size of RAM||64 MB|
|Storage size||16 MB|
|Tested ambient temperature||-40C to +70C|
|Wireless 2.4 GHz chip model||QCA9531|
|Wireless 2.4 GHz standards||802.11b/g/n|
|Transmit power (dBm)||Receive Sensitivity||Transmit power (mW)|
Ethernet test results
|RBwAP2nD-BE||QCA9533 100M one port test|
|Mode||Configuration||1518 byte||512 byte||64 byte|
|Bridging||none (fast path)||8.1||98.4||23.5||96.3||173.6||88.9|
|Bridging||25 bridge filter rules||8.1||98.4||23.5||96.3||70.9||36.3|
|Routing||none (fast path)||8.1||98.4||23.5||96.3||160.8||82.3|
|Routing||25 simple queues||8.1||98.4||23.5||96.3||90.8||46.5|
|Routing||25 ip filter rules||8.1||98.4||23.5||96.3||43.2||22.1|
- All tests are done with Xena Networks specialized test equipment (XenaBay),and done according to RFC2544 (Xena2544)
- Max throughput is determined with 30+ second attempts with 0,1% packet loss tolerance in 64, 512, 1518 byte packet sizes
- Values in Italic indicate that max throughput was reached without maxing out CPU, but because board interface configuration was maxed out
- Test results show device maximum performance, and are reached using mentioned hardware and software configuration, different configurations most likely will result in lower results