Mikrotik wAP R

Mikrotik wAP R

review
0
0
5
Your Price: $79.00
Pre-Order
10
Part Number:RBwAPR-2nD

wAP R

The wAP R is a small weatherproof 2.4Ghz wireless access point with a miniPCI-e slot (so you can use your own LTE card) and LTE antennas. Unit comes with one 10/100 Ethernet LAN port for your wired devices.

The weatherproof device can be mounted outside your house, in the vehicle, on your porch or anywhere else where you need wireless access from your phone or computer. It also includes a desktop stand so you can put it inside the building near a window.

Unit has the several powering options - 9-30V PoE-in by Ethernet port, DC jack and automotive connector, very handy in mobile devices like car, bus or train.

General

Details
Product codeRBwAPR-2nD
CPUQCA9531
CPU core count1
CPU nominal frequency650 MHz
Dimensions185x85x30 mm
Operating SystemRouterOS
Size of RAM64 MB
Storage size16 MB
Storage typeFLASH
Tested ambient temperature-40°C .. +60°C
Suggested price$79.00

Powering

Details
Max Power consumption6W
Number of DC inputs3 (DC jack, PoE-IN, Automotive)
PoE inPassive PoE
DC jack input Voltage9-30 V
PoE in input Voltage9-30 V
Automotive input Voltage9-30 V

Wireless

Details
Wireless 2.4 GHz number of chains2
Wireless 2.4 GHz standards802.11b/g/n
Antenna gain dBi for 2.4 GHz2
Wireless 2.4 GHz chip modelQCA9531

Ethernet

Details
10/100 Ethernet ports1

Peripherals

Details
Number of SIM slots1
MiniPCI-e slots1

Other

Details
PCB temperature monitorYes
Voltage MonitorYes

Wireless specifications

2.4 GHz
Transmit (dBm)Receive Sensitivity
1MBit/s22-96
11MBit/s22-89
6MBit/s20-93
54MBit/s18-74
MCS020-93
MCS716-71

Ethernet test results

RBwAPR-2nDQCA9531 100M one port test
ModeConfiguration1518 byte512 byte64 byte
kppsMbpskppsMbpskppsMbps
Bridgingnone (fast path)8.198.423.596.3173.688.9
Bridging25 bridge filter rules8.198.423.596.370.936.3
Routingnone (fast path)8.198.423.596.3160.882.3
Routing25 simple queues8.198.423.596.390.846.5
Routing25 ip filter rules8.198.423.596.343.222.1
  1. All tests are done with Xena Networks specialized test equipment (XenaBay),and done according to RFC2544 (Xena2544)
  2. Max throughput is determined with 30+ second attempts with 0,1% packet loss tolerance in 64, 512, 1518 byte packet sizes
  3. Values in Italic indicate that max throughput was reached without maxing out CPU, but because board interface configuration was maxed out
  4. Test results show device maximum performance, and are reached using mentioned hardware and software configuration, different configurations most likely will result in lower results

Recently Viewed Items