The RB411AR has an integrated 802.11b/g wireless card with MMCX conenctor.
Not only you have a readymade wireless solution, but also you have a spare miniPCI card slot for your choice of another wireless card!
With this device you can connect to a remote AP and serve your local area with internet both at the same time!
It has the same familiar footprint as the other RB411 series devices, which means you can mount it into any supported outdoor enclosure, and upgrading to this model will take just minutes.
|CPU core count||1|
|CPU nominal frequency||300 MHz|
|Size of RAM||64 MB|
|Storage size||64 MB|
|Tested ambient temperature||-40°C .. +70°C tested|
|Number of DC inputs||2 (DC jack, PoE-IN)|
|PoE in||Passive PoE|
|DC jack input Voltage||10-28 V|
|PoE in input Voltage||10-28 V|
|Wireless 2.4 GHz number of chains||1|
|Wireless 2.4 GHz standards||802.11b/g|
|Wireless 2.4 GHz chip model||AR2417|
|10/100 Ethernet ports||1|
Ethernet test results
|RB411AR||AR7130 100M 1 port test|
|Mode||Configuration||1518 byte||512 byte||64 byte|
|Bridging||25 bridge filter rules||8.1||98.6||23.5||96.3||41.0||21.0|
|Routing||25 simple queues||8.1||98.6||23.5||96.3||67.8||34.7|
|Routing||25 ip filter rules||8.1||98.6||23.5||96.3||24.7||12.6|
- All tests are done with Xena Networks specialized test equipment (XenaBay),and done according to RFC2544 (Xena2544)
- Max throughput is determined with 30+ second attempts with 0,1% packet loss tolerance in 64, 512, 1518 byte packet sizes
- Values in Italic indicate that max throughput was reached without maxing out CPU, but because board interface configuration was maxed out
- Test results show device maximum performance, and are reached using mentioned hardware and software configuration, different configurations most likely will result in lower results