RouterBoard RB911G-5HPacD

RouterBoard RB911G-5HPacD

review
0
0
5
Your Price: $69.00
Retail Price:$79.00
You Save:$10.00(13%)
Out Of Stock.
0
Part Number:RB911G-5HPacD

RB911G-5HPacD

RouterBOARD 911G-5HPacD is our low-cost small form factor CPE board with 802.11ac support. It's perfect for building low-cost 802.11ac CPE devices, as the list price is only $79. Yet, the device is very powerful- it's equipped with 720MHz CPU, 128MB RAM, Gigabit Ethernet port, power jack and 802.11ac 5GHz Dual Chain wireless onboard. Comes with RouterOS L3 license.

- RB911G-5HPacD-US (USA) is factory locked for 5170-5250MHz and 5725-5835MHz frequencies. This lock can not be removed.

- RB911G-5HPacD (International) supports 5150MHz-5875MHz range (Specific frequency range can be limited by country regulations).

General

Details
Product codeRB911G-5HPacD
CPUQCA9557
CPU core count1
CPU nominal frequency720 MHz
Dimensions105x105mm
License level3
Operating SystemRouterOS
Size of RAM128 MB
Storage size128 MB
Storage typeNAND
Tested ambient temperature-40°C .. +70°C tested

Powering

Details
Max Power consumption12W
Number of DC inputs2 (DC jack, PoE-IN)
PoE inPassive PoE
DC jack input Voltage8-30 V
PoE in input Voltage8-30 V

Wireless

Details
Wireless 5 GHz number of chains2
Wireless 5 GHz standards802.11ac
Wireless 5 GHz chip modelQCA9882

Ethernet

Details
10/100/1000 Ethernet ports1

Other

Details
PCB temperature monitorYes
Voltage MonitorYes

Wireless specifications

5 GHz
Transmit (dBm)Receive Sensitivity
6MBit/s31-96
54MBit/s27-81
MCS030-96
MCS727-77
MCS922-72

Ethernet test results

RB911G-5HPacDQCA9557 1G all port test
ModeConfiguration1518 byte512 byte64 byte
kppsMbpskppsMbpskppsMbps
Bridgingnone (fast path)81.2986.1234.9962.2477.7244.6
Bridging25 bridge filter rules81.2986.1118.4485.0119.561.2
Routingnone (fast path)81.2986.1234.9962.2408.2209.0
Routing25 simple queues81.2986.1158.3648.4165.884.9
Routing25 ip filter rules64.8786.970.4288.460.931.2
  1. All tests are done with Xena Networks specialized test equipment (XenaBay),and done according to RFC2544 (Xena2544)
  2. Max throughput is determined with 30+ second attempts with 0,1% packet loss tolerance in 64, 512, 1518 byte packet sizes
  3. Values in Italic indicate that max throughput was reached without maxing out CPU, but because board interface configuration was maxed out
  4. Test results show device maximum performance, and are reached using mentioned hardware and software configuration, different configurations most likely will result in lower results

Recently Viewed Items