wAP LTE kit-US

wAP LTE kit-US

review
0
0
5
Your Price: $94.00
Retail Price:$119.00
You Save:$25.00(21%)
In Stock.
20
Part Number:RBwAPR-2nD&R11e-LTE-US

wAP LTE kit-US

The wAP LTE Kit-US is a small weatherproof wireless access point with a built in cellular modem that supports 3G and 4G (LTE) connectivity. Connect to the wAP’s built-in 802.11b/g/n wireless and access the LTE network from your phone or any other wireless device. The wAP LTE also has one 10/100 Ethernet LAN port for your wired devices.

LTE cards are connected to two internal antennas with u.FL connectors, so if you want, you can unplug the connectors and add your own external LTE antenna for larger coverage. Unit has the several powering options - 9-30v PoE-in by Ethernet port, DC jack and Automotive connector, very handy in mobile devices like car, bus or train.

RBwAPR-2nD&R11e-LTE-US includes LTE modem that supports LTE bands 2,4,5 and 12, mostly used by mobile operators in United States, Canada and Latin America.

General

Details
Product codeRBwAPR-2nD&R11e-LTE-US
CPUQCA9531
CPU core count1
CPU nominal frequency650 MHz
Dimensions185 x 85 x 30 mm
License level4
Operating SystemRouterOS
Size of RAM64 MB
Storage size16 MB
Storage typeFLASH
Tested ambient temperature-40°C .. +60°C tested
Suggested price$119.00

Powering

Details
Max Power consumption8W
Number of DC inputs3 (Automotive, DC jack, PoE-IN)
PoE inPassive PoE
DC jack input Voltage9-30 V
PoE in input Voltage9-30 V
Automotive input Voltage9-30 V

Mobile

Details
3G CategoryR8 (42.2Mbps Downlink, 5.76Mbps Uplink) / R7 (21Mbps Downlinks, 5.76Mbps Uplink)
LTE Category4 (150Mbps Downlink, 50Mbps Uplink)
LTE FDD bands2 (1900MHz) / 4 (1700MHz) / 5 (850MHz) / 12 (700MHz)

Wireless

Details
Wireless 2.4 GHz number of chains2
Wireless 2.4 GHz standards802.11b/g/n
Antenna gain dBi for 2.4 GHz2
Wireless 2.4 GHz chip modelQCA9531

Ethernet

Details
10/100 Ethernet ports1

Peripherals

Details
Number of SIM slots1
MiniPCI-e slots1

Other

Details
PCB temperature monitorYes
Voltage MonitorYes

Wireless specifications

2.4 GHz
Transmit (dBm)Receive Sensitivity
1MBit/s22-96
11MBit/s22-89
6MBit/s20-93
54MBit/s18-74
MCS020-93
MCS716-71

Ethernet test results

RBwAPR-2nD&R11e-LTE-USQCA9531 100M one port test
ModeConfiguration1518 byte512 byte64 byte
kppsMbpskppsMbpskppsMbps
Bridgingnone (fast path)8.198.423.596.3173.688.9
Bridging25 bridge filter rules8.198.423.596.370.936.3
Routingnone (fast path)8.198.423.596.3160.882.3
Routing25 simple queues8.198.423.596.390.846.5
Routing25 ip filter rules8.198.423.596.343.222.1
  1. All tests are done with Xena Networks specialized test equipment (XenaBay),and done according to RFC2544 (Xena2544)
  2. Max throughput is determined with 30+ second attempts with 0,1% packet loss tolerance in 64, 512, 1518 byte packet sizes
  3. Values in Italic indicate that max throughput was reached without maxing out CPU, but because board interface configuration was maxed out
  4. Test results show device maximum performance, and are reached using mentioned hardware and software configuration, different configurations most likely will result in lower results

Recently Viewed Items